Mobile Technician II
Company: Penske Logistics
Location: Auburn
Posted on: September 27, 2024
Job Description:
Mobile Technician II
2410 Railway Ave., Everett, WA 98201
Exciting New Road Tech Program!
Position Summary:
Penske Mobile Technician II will generally assist in the repair and
diagnosis of major components or remove/replace major components at
the direction of the PFM Asset Supervisor. Expectations include the
ability to perform preventive maintenance (PM) service and to
diagnose and repair the following with little or no supervision:
Clutches, PTO Systems, Electric Systems, Hydraulic/Air Brake
systems, Heating/Air Conditioning Systems, and Instruments and
Gauges.
This position is managed by our corporate team, and the Mobile Tech
II will not work on equipment in a Penske facility.
Major Responsibilities:
- Demonstrate proficiency in the repair and diagnosis of: Engines
(gas and diesel); Power train to include differentials,
transmissions, clutches, drive shafts, PTO s and wheel ends;
Electrical systems including starters and
alternators; HVAC systems; Steering systems; Electronics to include
ECM s, ECU s, sensors, etc.; Engine bolt on items such as turbos,
fan clutches, injectors, cooling system, etc.; Brake systems
including ABS; and Suspension systems (spring and air)
- Perform mechanical and general appearance reconditioning of
equipment for trade-ins and prepare new equipment for
delivery.
- Identify and determine parts required for repair of
disassembled units
- Perform all levels of preventive maintenance services
- Perform duties with little or no supervision in a timely and
efficient manner
- Identify warrantable repairs and document on repair
order
- Maintain on-site work area appearance, safety, and
environmental compliance.
- Comply with all Penske and Customer work requirements
- Road test Vehicles when necessary to diagnose malfunctions or
to ensure that they are working properly.
- Use hand tools such as screwdrivers, pliers, wrenches, pressure
gauges, and precision instruments, as well as power tools such as
pneumatic wrenches, welding equipment, and jacks and
hoists.
- Inspect brake systems, steering mechanisms, wheel bearings, and
other important parts to ensure that they are in proper operating
condition.
- Perform routine maintenance such as changing oil, checking
batteries, and lubricating equipment and machinery.
- Adjust and replace brakes, tighten bolts and screws, and
reassemble equipment.
- Inspect, test, and listen to defective equipment to diagnose
malfunctions, using test instruments such as handheld computers,
motor analyzers, chassis charts, and pressure gauges.
- Examine and adjust protective guards, loose bolts, and
specified safety devices.
- Inspect and verify dimensions and clearances of parts to ensure
conformance to factory specifications.
- Specialize in repairing and troubleshooting of major components
such as engine, transmissions and differentials, to include
replacing complete assemblies, turbochargers, fuel system
components etc.
- Order, receive, and charge out parts. Maintain control of parts
inventory, including cores, via cycle counts and proper inventory
management.
- Serve as primary customer contact for day-to-day customer
needs, and escalate as required to sales/operations
management.
- Manage tire and wheels, both on equipment via inspections and
in inventory. - - Follow Penske safety practices at all
times.
- Other projects and tasks as assigned by supervisor
Why Penske is for You:
- Competitive starting salary
- Shift Premiums
- Career stability
- Opportunity for growth
- Excellent benefits, including lots of time off
- Strong, well-rounded training on a variety of OEM equipment
(Penske s Technician Certification Program is certified as a
Continuing Automotive Service Education provider)
- Advanced vehicle maintenance technology
- Location and schedule flexibility
Qualifications:
- 2-4 years practical experience with tractor trailer maintenance
required
- High school diploma or equivalent required
- Vocational/Technical or certification preferred
- Specialized training in the repair and replacement of vehicle
components preferred
- Proficiency in the use of shop tools required
- Current CDL license with air brake certification required,
willingness to acquire CDL if you do not have one.
- DOT medical card and/or ability to obtain DOT medical card
prior to commencing work.
- Ability to read a map.
- Ability to operate a 26,000 non-articulated vehicle safely and
professionally.
- Ability to utilize mapping tools (e.g. Waze)
- Self starter who is able to work with minimal direct
oversight.
- Basic computer skills required for data entry into maintenance
systems.
- Ability to work in non-climate controlled conditions
required
- The associate will be required to understand and comply with
specific instructions, guidelines, rules, regulations, or other
information established by Penske management
- The associate must be able to perform all work adhering to DOT,
OSHA, and all Penske safety and maintenance policies; including but
not limited to the correct selection and use of appropriate tools,
PPE, machine guarding, and established best safety
practice.
- Regular, predictable, full attendance is an essential function
of the job
- Willingness to travel as necessary, work the required schedule,
work at the specific location required, complete Penske employment
application, submit to a background investigation (to include past
employment, education, and criminal
history) and drug screening are required
Physical Requirements:
The physical and mental demands described here are representative
of those that must be met by an associate to successfully perform
the essential functions of this job. Reasonable accommodations may
be made to enable individuals with disabilities to perform the
essential functions.
- While performing the duties of this job, the associate will be
required to move frequently, stand, walk, climb, bend, and sit for
extended length of time throughout their scheduled working
period.
- The associate is required to use their hands on a routine and
daily basis to grasp, reach, touch, handle, feel, and/or otherwise
operate required tools or controls.
- The associate must be able to work safely at heights using
applicable ladders and elevated working platforms.
- The associate must be able to safely work in all weather
conditions.
- Given the frequent movement of large trucks through the
workplace, the associate must be able to see and hear in order to
safely navigate the work environment.
- The associate must be able to regularly lift and/or move up to
50lbs/23kg and occasionally lift and/or move up to 100lbs/45kg.
Penske is an Equal Opportunity Employer.
Salary: $33.79/hourly plus 10% mobile pay
Hours: Mon - Fri 2nd shift
Shift Differentials:
- Second shift start times after 11am are eligible for $1.50 per
hour shift differential
- Third shift start time after 9pm are eligible for $2.00 per
hour shift differential
Benefits: Our excellent benefits plan keeps associates and their
families happy, healthy, and secure. To learn more visit
https://penske.jobs/benefits/
PJ500
ABOUT US
About Penske Truck Leasing/Transportation Solutions
Penske Truck Leasing/Transportation Solutions is a premier global
transportation provider that delivers essential and innovative
transportation, logistics and technology services to help companies
and people move forward. With headquarters in Reading, PA, Penske
and its associates are driven by a dedication to excellence and a
commitment to customer success. Visit Go Penske to learn more.
Keywords: Penske Logistics, Auburn , Mobile Technician II, IT / Software / Systems , Auburn, Washington
Didn't find what you're looking for? Search again!
Loading more jobs...